If you can select L or R for the iRig output, the panning node isn’t needed. In the output I just have HeadphoneL selected, but you would select the iRig L output. I put a panning node on this track and pan it hard left. At the output of Track1, I select IAA/Audiobus for the output.įor Track 2, I select Buss Send A to receive the audio from Track 1. You can easily rearrange FX order in AUM. If you want dry guitar going to your Amp FX loop, put the Bus Send before Amplitube. I assume you want Amplitube on both the Loopy signal and the Amp FX loop signal, so I put the Buss Send after Tonestack in my example. This goes into Tonestack for me in the effect slot, you run Amplitube instead. But, I don’t know if this would change if I had an interface with more output options. I’m thinking that means that I can’t choose AmpliTube more than once in Audiobus. However, AmpliTube is ‘grayed-out’ after choosing it once. I was hoping I could just choose AmpliTube as another input and choose my hardware output as the second output. I guess my question really is, how do I route this in Audiobus? Currently, I choose AmpliTube as an input, with Loopy as output. With just the iRig mono cable, you are kinda stuck. Same with a simple stereo input, you could run it dual mono. If you do mono output, you can probably use a simple stereo out device and use it as dual mono. If you try to bring a single guitar input multiple times into Audiobus, they all combine onto one mixer channel.

For input, you should look for a device that has multiple selections for the guitar input, such as “1, 2, or 1+2.” That way your inputs in Audiobus will have separate mixer channels and assignable outputs. You are going to need an audio device with multiple outputs, at least two discreet stereo outs you can assign separately in Audiobus. So where does the Loopy output go? To the amp as well? Does it need to be in the effect loop path too? You are recording loops in Loopy and outputting the looped audio, but not the live guitar/Amplitube signal. Loopy is receiving input from your guitar through Amplitube, but has nothing to do with the amp or effects loop. Where does this go from here? To the amp speakers? The line out goes into your amp and gets processed by the effects loop. So if I understand correctly, you want to plug your guitar into Amplitube and send it to line out as well as Loopy.

Loopy hd mac